Link TCC08 8-channel EGT to CAN module, powered by CANchecked
The Link TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and transmit the values via the CAN bus and/or monitor them directly on a wireless device. This module is ideal for measuring temperatures in a variety of applications, including exhaust gas temperature (EGT), pre- and post-intercooler temperatures, turbocharger housing temperatures, cylinder head temperatures, water temperature, oil temperature, and more.
The Type-K thermocouples are ideally suited for high-temperature measurements, offering accurate measurements from 0 to 1250°C with a resolution of 0.25°C (14 bits). All measurements are cold-junction compensated, ensuring reliable results even in challenging environments.
The TCC08 has a 4-pin DTM connector for CAN and power, which is compatible with Link's standard CAN pinout and cables. The module supports the CAN 2.0A/B standard with flexible configuration options.
With wireless connectivity, you can easily configure and update the module via a smartphone or PC and instantly retrieve the current temperature and thermocouple status.
Features:
- 8 x cold-junction-compensated Type-K inputs
- CAN Bus connection to ECU (preconfigured for Link ECU)
- Measuring range from 0 to 1250°C (32 to 2282°F) with a resolution of 0.25°C
- Detection of short circuit to ground or if no Type-K is connected
- Standard mini K thermocouple connector
- Full configuration and monitoring via wireless
- Adjustable sampling rate up to 100Hz
Box contents:
- 1 x CAN EGT Module
- 1 x DTM4 Mating Connector Kit
- 2 x Link Stickers
Specifications:
- DTM 4 CAN Pinout (supports Link's CAN pinout and CAN cable range)
- Pin 1: 12V
- Pin 2: Ground
- Pin 3: Can Low
- Pin 4: Can High
- Accuracy: maximum 2% deviation
- Dimensions (L x W x H) – 129 x 31.5 x 34.6 mm
Configuration options:
The module can be configured wirelessly:
- CAN Speed: 125kbps, 250kbps, 500kbps, 1Mbps
- Emulation: Standard, All major aftermarket EGT/Thermocouple to CAN modules
- Change of standard Can Bus ID
- Change of Big/Little Endian